The term wreck diver is usually associated with recreational diving, exploring shipwrecks. Although wrecks are the most common site for wreck diving, there is a growing trend to scrape old ships to make artificial reef sites. Learn more about wreck diving by reading on. Here are some tips to help you get started. First, get your equipment ready! There are many types of equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
Wreck diving that is not pierced
You can learn a lot about non-penetration wreck diving if you are new to diving. First, wrecks can be used as a fishing spot, so divers need to be aware of lines and nets. Additionally, the underlying terrain can have sharp edges and currents may carry them away from where they are interested. Non-penetration wreck diving, while not advised, is an alternative.
Although technical penetration diving sounds easier than it actually is, there are many dangers involved. The dangers of diving in the light zone include overhead hazards, proximity to the wreck structure, and the possibility of getting caught in tight passageways. Silt and mud may also be present in some wrecks, which can greatly reduce visibility and make it difficult for divers to keep their eyes open. Non-penetration wreck diving is best. Divers should stay in the light zone and then move to an exit point.
Surveying a sunken wreck
To survey a sunken ruin, in addition to traditional surveys and knowledge of the maritime history of this area, you will need specific equipment. Depending on your time and requirements, you may use a combination GPS position fix, tape baseline, or offset with ties measurements. A variety of techniques are available to survey a sunken ruin, including sonar and non-destructive methods.
The objective of a shipwreck survey is to identify the vessel and its location. It should identify navigational hazards as well as environmental conditions. Historical events are also included. The survey report should include information about the vessel's features, the incident that brought it down, and any past archeological surveys. To make precise measurements, it should be possible plot the site on a chart.
Equipment required
It is important to know the details of a shipwreck before diving. You should be familiar with the shipwreck's layout, key points, and hazards. Knowing these things will help you prepare for your dive and minimize the chances of an accident. Below you'll find the information you need to dive in a shipwreck. This checklist should be read before you dive.
Proper buoyancy control is essential to avoid losing your way in the dark. To wreck dive, it is essential to maintain good buoyancy. You shouldn't dive in deep waters without a weight belt or a buoyancy controller tank. You will have a lot of fun diving if you have a weight belt. These two pieces will help ensure your safety as well as the safety of others at the wreck.