Wreck diving can be associated with recreational dives and exploration of shipwrecks. Shipwrecks are still the best place to wreck dive, but there is an increasing trend to dismantle old ships in order to make artificial reefs. Learn more about wreck diving by reading on. Here are some tips to help you get started. First, get your equipment ready! There are many kinds of equipment. You can make the difference of a fun or dangerous dive by choosing the right gear.
Non-penetration wreck diving
There are some things that you should know if you're new to scuba diving or want to learn more about non-penetration dives. First, wrecks can often be used to fish so divers should be mindful of any fishing nets or lines. They may also find themselves in dangerous terrain with sharp edges. Additionally, currents can push them away from the places they want. Non-penetration wreck diving, while not advised, is an alternative.
Although technical penetration diving sounds easier than it actually is, there are many dangers involved. Avoiding the light zone means you can be exposed to overhead hazards, close proximity to the wreck structure and risk getting trapped in narrow passageways. Silt and mud may also be present in some wrecks, which can greatly reduce visibility and make it difficult for divers to keep their eyes open. To avoid these dangers, non-penetration wreck diving requires that the diver stay within the light zone and move to an exit point.
A view of a sunken ruin
A survey of a sunken wreck requires special equipment, as well as a deep understanding of maritime history. The survey method used depends on how accurate and time-consuming it is. It may include a GPS position fix or a tape baseline. Or offset and ties measurements. Several techniques are available for surveying a sunken wreck, including sonar and other non-destructive methods.
A shipwreck survey's objective is to locate the vessel and determine its exact location. It should also identify navigational hazards, environmental conditions, and historical events. The survey report should include a summary of the vessel's structural features, the incident that sank it, and any prior archeological surveys. The site should be able to be plotted on an nautical chart to allow for precise measurements.
Equipment is required
Before diving a shipwreck, you should know about it. You should be familiar with the shipwreck's layout, key points, and hazards. These things will help you prepare for your dive, and reduce the chance of an accident. You'll find information about all the equipment required to dive a shipwreck. This checklist should be read before you dive.
Proper buoyancy control can prevent you from losing your way in dark waters. For wreck diving, you need to have good buoyancy control. It's not recommended to dive in deep water without a buoyancy control tank and a weight belt. For fun diving, you will need a weight belt as well as a scuba regulator. These two pieces of equipment will ensure your safety and that of others on the wreck.