Tech dive gear is required to explore the depths of the ocean. These specialty gears have features that are not available in recreational diving equipment. BCDs with sidemount or backplate/wing are two examples. Advanced regulators, tanks and computers will be required if you are serious about diving in technical areas. This article will show you what to look out for in gear that suits your needs.
Technical diving equipment
Tech diving gear is modular. It can be customized to fit your needs. The basics of a tech BCD include a backplate in steel or aluminum, harness, and an air bladder. D-Rings can be added to make the harness fit your body. Another option is the wings. They are available in various sizes and configurations. Even a single tank can be used to customize your gear.
Types of gear
There are many variations between technical and recreational divers equipment. Each dive requires different equipment. Tech divers will often require special backplates/wings or sidemount BCDs, while recreational divers might use a standard BCD. They need sophisticated regulators, tanks, and computers. This article will explore the differences between the two types of gear and what you should look for in your technical diving equipment. These guidelines will help you choose the right equipment for your diving needs.
Configuration of gear
Tech divers are often required to use different gear. Despite these differences, all of the gear is optimized for the same purpose: keeping a diver comfortable during the dive. Listed below are some tips on tech dive gear configuration. Remember that the gear configuration must be simple and effective. A good regulator will have a high efficiency rating. Because gas density increases when diving deep, equipment should be able to withstand these changes.
Computers
High-tech dive computers feature larger screens and HD screens as well as advanced features for technical diving. They include detailed decompression calculations and can be used for all kinds of diving, from recreational to technical. Some models include hoseless air integration and digital compasses. Having all of this information is important for safety, as diving computers can be inaccurate if they don't calculate decompression factors in a specific way.
For cold-water divers, thermal protection
Special Operations Forces personnel use neoprene totsuits for training and operations. These suits provide only a fraction of the insulation they offer when they are on the surface. They also only provide about 1/4 of the insulation when they are 100 feet deep. New wetsuit designs with R-values below ten are being developed to address this problem. These suits are innovative and combine multi-layer constructions, with stop-gap substances, to reduce thermal friction.
Rebreathers
If you've decided to upgrade from open circuit scuba gear to rebreathers, you've probably wondered what the difference is between them and traditional regulators. Rebreathers can cause more harm than open circuit counterparts and require more maintenance. As with all dive equipment, it's worth spending time researching the benefits of rebreathers before buying one.
Sidemount BCDs
The STEALTH 2.0 is one of the first sidemount BCDs for technical divers, and it has proven to be a revolutionary design. This backmount harness features an integral TEC wing for added security during decompression stops and deep dives. The manufacturer has also developed a bottom-mounted low -pressure inflator. The STEALTH2.0 is available in single, double, and dual-tank configurations.